# STEP 1: Install Zen Studio

Zen Studio is our exclusive Windows software. Use it to combine controllers, configure mouse and keyboard setups, and access advanced features available to registered Cronus Zen owners.

## Step-By-Step

***

{% stepper %}
{% step %} <a href="../../../zen/downloads#zen-studio" class="button primary">Download Zen Studio</a>
{% endstep %}

{% step %}
Plug your Cronus Zen into a computer using the **PROG USB** port.

<figure><img src="https://2136520299-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fa1t6RET8gDbZRwSCKi5I%2Fuploads%2FlVXMbuPdS5T9BcvJnfbJ%2F4.png?alt=media&#x26;token=84cd7e6f-e80f-45b6-a0c5-de4532c7953a" alt=""><figcaption><p>PC Connection via PROG USB Port</p></figcaption></figure>
{% endstep %}

{% step %}
Open Zen Studio. When Cronus Zen is detected, the GPC Library appears on the left.

The **serial number** appears in the bottom-right corner.&#x20;

<figure><img src="https://2136520299-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fa1t6RET8gDbZRwSCKi5I%2Fuploads%2FOCzncE1fIkAdOv8e2AHb%2F1.png?alt=media&#x26;token=354a64e6-e1f6-4d71-8642-d2dfbdd9d5d2" alt=""><figcaption></figcaption></figure>

{% hint style="danger" %}

## **DEVICE DISCONNECTED**

If the Zen Studio status bar shows “Device Not Connected” or another error, the issue is typically a faulty USB cable.
{% endhint %}
{% endstep %}

{% step %}
**Important:** After installing a new version of Zen Studio, select **Tools > Reset Zen Studio** and confirm with **Yes** to prevent conflicts from older files.

**Warning:** This action deletes all backups, settings, and stored files.

<figure><img src="https://2136520299-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fa1t6RET8gDbZRwSCKi5I%2Fuploads%2Ft8z6KdjfQfJvadhbgHzV%2F9.png?alt=media&#x26;token=af55a4f6-afdf-48de-992e-d78e95c5b9a2" alt=""><figcaption></figcaption></figure>
{% endstep %}

{% step %}
Disconnect the PROG USB cable from the Cronus Zen.\
Keep it connected to the PC for **Step 2: Update Firmware**.
{% endstep %}
{% endstepper %}