# Apple®

Cronus Zen™ supports compatible Apple devices, including iPad®, iPhone®, and Mac®. It allows the use of supported controllers across these platforms.

## Step-By-Step

***

{% stepper %}
{% step %}
Connect Cronus Zen™ to a Windows® PC using the **PROG USB port**.

{% endstep %}

{% step %}
Open **Zen Studio → Device Panel** and enable **PS Remote Play**.\
You may then disconnect the **PROG USB cable**.

**Note:** This setting ensures controllers connected to the Apple device are detected correctly.
{% endstep %}

{% step %}
Connect Cronus Zen™ to the supported Apple device using the **CONSOLE/PC USB port**.\
A compatible **Lightning adapter** (or USB-C adapter, depending on the device) is required.
{% endstep %}

{% step %}
Ensure the Zen is powered on. Wait approximately 10 seconds before connecting a controller.
{% endstep %}

{% step %}
After 10 seconds, connect a supported controller to the Zen’s A3 USB port.

**Note:** Wireless controllers must be fully charged. They do not charge from the Apple device.
{% endstep %}
{% endstepper %}


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://guide.cronuszen.com/supported-devices/apple.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.