> For the complete documentation index, see [llms.txt](https://guide.cronuszen.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://guide.cronuszen.com/supported-devices/controller/gamesir-tm-g7-he-se-firmware-fix.md).

# GameSir™ G7 HE/SE — Firmware Fix

After the latest firmware update, **GameSir G7 HE/SE** controllers no longer work when connected directly to the Cronus Zen™.

There are two ways to fix this:

* **Method 1:** Downgrade the controller firmware to a compatible version.
* **Method 2:** Switch the input mode to restore Cronus Zen™ compatibility — no downgrade needed.

***

<i class="fa-clock-rotate-left">:clock-rotate-left:</i> **Method 1: Downgrade the firmware**

Download the older firmware and install it on the controller:

{% file src="/files/OHWzvGCzHwIM7PwHqlFM" %}

***

<i class="fa-sliders">:sliders:</i> **Method 2: Change the input mode (G7 SE)**

{% stepper %}
{% step %}
**Install GameSir Nexus**

Download the [GameSir Nexus app](https://gamesir.com/support/downloads).
{% endstep %}

{% step %}
**Update the controller**

Select **Update** and update the controller to the latest version.
{% endstep %}

{% step %}
**Open the profile**

Select **Profiles**. Profile 1 should be highlighted — select **Configure**.
{% endstep %}

{% step %}
**Set the stick ranges**

Select **Sticks** at the top of the screen.

| Stick       | Initial |     RAW     |
| ----------- | :-----: | :---------: |
| Left stick  |  **0**  | **Enabled** |
| Right stick |  **0**  | **Enabled** |

Move the sticks around until both **X** and **Y** read **0.00%**, then press **A** to confirm.
{% endstep %}

{% step %}
**Set the polling rate**

Set the controller polling rate to **250 Hz**.

Some G7 controllers may also work correctly at **500 Hz** or **1000 Hz**.

{% hint style="warning" %}
If 1000 Hz causes connection or compatibility issues, use 250 Hz.
{% endhint %}
{% endstep %}

{% step %}
**Connect the Zen to your console**

Connect the Cronus Zen™ to your console using the **CONSOLE/PC USB** port.
{% endstep %}

{% step %}
**Connect the controller to A1**

**Wait 5 seconds**, then connect the GameSir controller to **A1**.

{% hint style="warning" %}
If you don't wait, the controller will not power on. Look for the **white LED**.
{% endhint %}
{% endstep %}

{% step %}
**Reset the Zen**

Tap the Zen's **reset** button. After a few seconds, the RGB lights change to **green**.

You're now ready to play.
{% endstep %}
{% endstepper %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://guide.cronuszen.com/supported-devices/controller/gamesir-tm-g7-he-se-firmware-fix.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
