# PlayStation®5 Setup
Cronus Zen™ provides compatibility for select legacy Logitech® and Fanatec® racing wheels on PlayStation®5, including support for Force Feedback, pedals, brakes, clutch, and shifter in compatible racing titles.
Wheel Mode development concluded in January 2020.\
Further expansion is not feasible due to device memory and compatibility constraints across multiple hardware brands and platforms.
For expanded racing wheel compatibility, consider Drive Hub™, a dedicated wheel adapter solution.
## Supported Racing Wheels
***
* Fanatec® ClubSport Wheel Base v1
* Fanatec® ClubSport Wheel Base v1.5
* Fanatec® ClubSport Wheel Base v2
* Fanatec® CSR
* Fanatec® CSR Elite
* Fanatec® Porsche 911 GT2
* Fanatec® Porsche 911 GT3
* Fanatec® Porsche 911 GT3 R
* Fanatec® Porsche 911 GT3 RS v2
* Fanatec® Porsche 911 Turbo
* Fanatec® Porsche 911 Turbo S
* Logitech® Driving Force GT
* Logitech® G25
* Logitech® G27
#### Fanatec® Notes
• The wheel must be set to **PS3 Mode** with the **DC power supply connected**.\
• Refer to the **Fanatec PS3 Mode** page for detailed instructions.
#### Logitech® G25 Notes
• Set the wheel to **PS3 Mode** with the **DC power supply connected**.\
• To switch between **Six-Speed** and **Sequential Mode**:
* Push down on the shift knob and rotate the **Mode Selection Dial** until the red arrow points to the desired symbol.
* In Sequential Mode, the status light is **on**.
* In Six-Speed Mode, the status light is **off**.
#### Logitech® G27 Notes
• Set the wheel to **PS3 Mode** with the **DC power supply connected**.
#### Logitech® G29 Notes
• Works directly on PS4® / PS5® without Cronus Zen™.\
• Set the wheel to **PS4 Mode** with the **DC power supply connected**.
## PS5® Console Settings
***
Before setting up Wheel Mode, complete the following:
• Confirm the game supports PS5® wheel input (see compatibility list).\
• Ensure no PlayStation® controllers are paired to the console. Remove them from **Bluetooth Accessories**.\
• Disable all scripts and GamePacks during wheel setup.
**Important:**\
When a DualSense® or DualShock®4 is connected directly to a PS5® via USB, it also pairs over Bluetooth®.\
To properly unpair a controller:
1. Connect Cronus Zen™ to the PS5® using any controller.
2. Go to **Settings → Accessories → Bluetooth Accessories**.
3. Select the controller and choose **Delete**.
This prevents automatic Bluetooth re-pairing.
## Required PS5® Settings
***
Navigate to:
**Settings → System → Power Saving → Set Time Until Controllers Turn Off**\
• **Don’t Turn Off**
**Settings → System → Power Saving → Features Available in Rest Mode**\
• **Supply Power to USB Ports → Always**
**Settings → Accessories → Controllers → Communication Method**\
• **Use USB Cable**
## **SETUP PS5 WHEEL MODE**
***
In PS5® Wheel Mode, supported racing wheels are automatically mapped to emulate a Logitech® G29 profile with full Force Feedback (FFB) support.
No manual button remapping is required.
## **IMPORTANT**
***
If your wheel requires an external power supply (e.g., Logitech® G25, G27, G29 — DC 24V 2A / 48W), it **must** be connected.\
All included peripherals (pedals, brake, clutch, shifter, etc.) must also be properly connected.
Operating the wheel without the required power supply may result in abnormal behavior, including:
• No Force Feedback\
• Continuous button inputs (e.g., D-Pad registering repeatedly)\
• Clutch or pedal input not detected
Example: A Logitech® G27 used in Gran Turismo® 7 without its power supply may exhibit these issues.
## **RACING WHEEL (USB)**
***
#### Requirements
• PlayStation®5 console\
• Compatible racing wheel\
• PS4® Speciality authentication controller (e.g., HORI® PS4 Mini-Pad)\
• Zen Studio installed on a Windows® PC
#### Configure Wheel Mode
**1.** Connect Cronus Zen™ to a PC using the **PROG USB port**.
**2.** Open **Zen Studio → Tools → Zen Operational Mode**.\
Select **Wheel Mode**, then click **Finish**.
The **Wheel Mode logo** should appear on the Zen OLED screen.
**3.** Press the Zen **reset button** once to confirm Wheel Mode is active.\
If “Device Disconnected” appears, reconnect the PROG USB cable.
**4.** In **Zen Studio → Device Panel**, enable **PS4 Speciality**.
Allow the Zen to restart.\
To confirm it remains enabled, disconnect and reconnect the **PROG USB cable** and verify the setting is still active.
#### Connect Hardware
**5.** Disconnect all cables from the Zen (no power).
**6.** Connect the **PS4 Speciality authentication controller** to **A1**.
**7.** Connect the **racing wheel** to **A3**.\
Ensure the wheel’s **external power supply** is connected.
**8.** Connect Cronus Zen™ to the PS5® using the **CONSOLE/PC USB port**.
**9.** Press the Zen **reset button** to complete synchronization.
## **Warning**
***
During Force Feedback (FFB) initialization and auto-calibration, do not touch the wheel.\
Unexpected movement may cause injury or result in incorrect calibration.
For additional methods and troubleshooting related to Fanatec® PS3 Mode, refer to the relevant topic in the Cronus forums.