> For the complete documentation index, see [llms.txt](https://guide.cronuszen.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://guide.cronuszen.com/zen-fr/shooter-studio/installation.md).

# Installation

Installez Shooter Studio sur votre Cronus Zen™.

***

{% stepper %}
{% step %}
**Connecter le Cronus Zen à votre PC**

Branchez un câble USB au port **PROG USB** (sur le côté droit) du Cronus Zen™ et à votre PC.

{% hint style="warning" %}
Le câble doit être un câble de **transfert de données**, et non un câble de charge uniquement. Avec un câble de charge uniquement, le Zen s’allume, mais reste invisible pour votre ordinateur.
{% endhint %}
{% endstep %}

{% step %}
**Ouvrir Zen Studio Live**

Ouvrez [zenstudio.collectivemindsstore.com](https://zenstudio.collectivemindsstore.com/) dans votre navigateur : aucune installation n’est nécessaire. **Chrome** est recommandé.
{% endstep %}

{% step %}
**Connecter votre appareil**

Cliquez sur **Connect Device** et sélectionnez `Cronus Bridge` dans la liste.
{% endstep %}

{% step %}
**Placer Shooter Studio dans un emplacement**

Cliquez sur l’icône **en forme de réticule** dans la barre latérale gauche.&#x20;

<figure><img src="https://2121631285-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fa1t6RET8gDbZRwSCKi5I%2Fuploads%2FHPjiGu905JXbLy4VqDoq%2F10.png?alt=media&amp;token=fc8cfa54-5e82-4792-baa5-6086a46b6080" alt=""><figcaption><p>Lancer Shooter Studio dans Zen Studio Live</p></figcaption></figure>
{% endstep %}

{% step %}
**Préparer la programmation**

Cliquez ensuite sur **+ SET UP** dans l’emplacement que vous souhaitez utiliser.

<figure><img src="https://2121631285-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fa1t6RET8gDbZRwSCKi5I%2Fuploads%2FMFBEsS7J4geysKXOqZzQ%2F11.png?alt=media&amp;token=0ba48fb4-701d-4019-8315-b030bd1bb0cc" alt=""><figcaption><p>Sélectionner un emplacement</p></figcaption></figure>
{% endstep %}

{% step %}
**Programmer le Zen**

Cliquez sur **Save Changes** (1), puis sur **Program** (2) → **Program Slots** (3).

Une fois la commande **Program Slots**lancée, quelques secondes sont nécessaires pour programmer Shooter Studio sur le Cronus Zen™.

{% hint style="warning" %}
**Ne déconnectez pas le Zen** avant la fin de l’opération.
{% endhint %}

<figure><img src="https://2121631285-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fa1t6RET8gDbZRwSCKi5I%2Fuploads%2FXmPZ0HAHtSUdpPIWmUuF%2F8.png?alt=media&amp;token=e4703dac-de75-4e99-92d4-91b7a4c95767" alt=""><figcaption><p>Programmer Shooter Studio sur le Cronus Zen</p></figcaption></figure>

<div align="left"><figure><img src="https://2121631285-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fa1t6RET8gDbZRwSCKi5I%2Fuploads%2FBoFIxyUcOGQ9jZ3v3cbu%2F9.png?alt=media&amp;token=0136a741-22d4-44b6-b1f2-e395b2d2799a" alt=""><figcaption><p>Programmation en cours</p></figcaption></figure></div>
{% endstep %}

{% step %}
**Lancer Shooter Studio sur le Cronus Zen**

Appuyez sur le **bouton bleu de droite** du Cronus Zen jusqu’à ce que l’emplacement Shooter Studio se charge.\
L’écran affiche `SHOOTER STUDIO` et `LOADING` pendant environ deux secondes.

<div align="left"><figure><img src="https://2121631285-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fa1t6RET8gDbZRwSCKi5I%2Fuploads%2Fe668QZ3AgXX2Ehp5AYlX%2Fshooter-studio-splash.svg?alt=media&amp;token=1c7ee3ea-83d9-43c9-a626-8bd3aca82aed" alt="" width="288"><figcaption><p>Démarrage de Shooter Studio</p></figcaption></figure></div>
{% endstep %}

{% step %}
**Chargez vos armes**

Vous pouvez maintenant créer votre propre profil ou [importer un profil prêt à l’emploi](https://guide.cronuszen.com/zen-fr/shooter-studio/installation/importation-des-armes.md) pour votre jeu.
{% endstep %}

{% step %}

### **Vous préférez regarder quelqu’un le faire ?** <a href="#prefer-to-watch-someone-do-it" id="prefer-to-watch-someone-do-it"></a>

Nous avons une courte vidéo qui vous guide tout au long de l’installation.

{% embed url="<https://www.youtube.com/watch?v=Px-fESgKxAg>" %}
Installation de Shooter Studio
{% endembed %}
{% endstep %}
{% endstepper %}

***

### <i class="fa-arrows-rotate">:arrows-rotate:</i> **Mise à jour de Shooter Studio**

Programmez la nouvelle version dans le **même emplacement**. Vos paramètres, votre étalonnage, vos armes et vos macros sont conservés.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://guide.cronuszen.com/zen-fr/shooter-studio/installation.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
