Device
The Device tab allows you to:
• View connected devices • Configure device options • Manage output protocols • Run maintenance tools • Access diagnostics
Device Options
DualShock®4 Light Bar Brightness
Adjust DS4 light bar brightness in real time.
Open Device Monitor with Build and Run
Automatically opens Device Monitor when using Build and Run (F5).
Unload Script When Closing Device Monitor
Scripts launched with Build and Run (F5) will unload when Device Monitor is closed.
Disable Screen Saver When Device Monitor Is Open
Temporarily disables the Windows screensaver while Device Monitor is active.
Open GamePack Configuration After Drag and Drop
Automatically opens the GamePack configuration interface after assigning it to a memory slot.
Enable Autosave in Compiler
Automatically saves open files to prevent data loss.
Use Legacy 16-Bit Compiler
Enables compatibility with older 16-bit scripts. Select this only when required for legacy scripts.
PS4 Speciality (PS5 Support)
PS5 usage may require a licensed third-party PS4 controller as an authentication device (“PS4 Speciality Controller”).
When enabled, this allows supported controllers to function on PS5/PS4 titles without periodic disconnection.
To enable:
Select Enable PS4 Speciality (For PS5 Console).
The device will reset automatically.
If not detected afterward, click Find Device.
Enable PS Remote Play
Select Enable PS Remote Play® to configure the device for Remote Play usage.
The device will reset after activation.
Emulator Output Protocol
Select the console output type:
• PlayStation 4 / 5 • Xbox One / Series X|S • Nintendo Switch • PS3 • Xbox 360 • PC / Mobile
Default: Auto (recommended)
If experiencing PC detection issues, manually select Xbox 360 or PC/Mobile.
Mirror Function
The Output Protocol mirrors the controller connected to A1.
Any controller connected to A2, A3, or Bluetooth will appear to the console as the A1 device type.
Not applicable to PS5 authentication methods.
Remote Slot Change
Allows memory slot switching directly from the connected controller. Available button combinations vary by controller type.
Maintenance Tools
Factory Reset
Restores all settings to default and erases memory slots.
Erase Memory Slots
Clears all memory slots without changing other device settings.
Reset Device
Reboots the Zen without manual power cycling.
Find Device
Reinitializes device detection in Zen Studio.
Bluetooth Management
Clear BT Devices
Clears all stored Bluetooth pairings.
Steps:
Power off the device you want to unpair.
Open Zen Studio → Device Tab → Clear BT Devices.
Confirm until completion message appears.
Disconnect all USB cables from the Zen.
Pair the controller to another device before reconnecting to Zen.
Diagnostics
Device Monitor
Displays real-time:
• I/O data • CPU load • VM speed • Battery status • USB / Bluetooth inputs • Rumble and LED states
Connected Devices
Displays logos of registered consoles and input devices currently detected.
Zen Flash
Shows flash memory usage for loaded scripts and GamePacks.
Zen Serial Number
Displays the device’s unique serial number. Used for product registration and access to restricted community areas.
Last updated